#1 work on Com8-A1 Ankle Lock Rod Placement (good placement) and 2-3-2 transition in video

I've worked again the ankle lock placement. I've used the wrong hole on the ankle lock.
I've modified the installation and made photos for the second foot

here are the lines and the position used to drill holes

the first line is at the center position and the second line is the position for drilling.

41mm from the center and 16mm from the inside side of the U channel.

the hole needs to be enlarge from 29mm to 49mm

and the part installed into the foot

full rear position

full front position

and the ankle :

and the lock part into installed into the foot and through the ankle :

the hole at the top of the leg don't need to be too large, an half hole seems to be enough large.

and the test in video (happy)

but i don't like the lack of stability

I will ask others builders to find the differents ways to change that ;-)